Quadcopter fails to take off after replacing propeller

From miscellus

Quadcopter fails to take off after replacing propeller blade

DJI Phantom 2 Vision+ Quadcopter

Most quadcopters come with replacement propeller blade kits that either push fit or are screwed on. If you've replaced a propeller blade and the copter no longer flies, yet it flew perfectly until the blade was changed you almost certainly have replaced it with a blade with the feather of the blade set in the wrong direction.

The blades are angled to oppose each other so if you've replaced the blade with one angled in the wrong direction it will be acting against its partner blade and counteracting any lift.


Most blades are marked on the top, replace it with one similarly marked or just compare it with the blade you removed if you have.

Identifying blade pairs

Normally similarly coloured blades should rotate in the opposite direction to each other, failing that, blades by similarly colored navigation lights should rotate in opposite directions.

As a last resort, you should definately have two blades turning one way and two turing the in the other direction when you blow on them.